Reactions
-
Re: RE: Input Voltage Tolerances - What are the min and max voltages for this device?
Hi All, The voltage input tolerance for UP Core Plus board is 12V +-5% (up to 12.6V and 11.4V), the board will work normally within this power input range, if it is over or under, the board will not …1 · -
Re: Power Up Core Plus from 100-pin headers
Hi JoseN, The UPC-plus board is designed to use with 12VDC power input. If you plug in a 5VDC power, the board will not boot up. However, if you are designing your own customized carrier board and us…1 · -
Re: Serial Voltage Regulator
Hi Luca, Unfortunately if the UP board got more than 5V it will get burnt and the PCB trace will get damanged beyond repair. UP2 and UP-core has OCP so it will not get burnt like the UP board. You ca…1 · -
Re: hello , i want use up board for show two different image and in two display, up support this ?
Hi Ali, Yes, UP board supports two independent display, one from onboard HDMI, one from eDP connector. To use the eDP connector, we do sell 7" and 10.1" touch display kit on UP shop with in…1 · -
Re: BIOS does not show EMMC in boot options
Hi Yugendra, The EMMC is in the BOOT selection of the BIOS menu as below picture If the EMMC is empty without any OS installed, it will just show Hard Disk If the EMMC is installed with Linux or Wind…1 ·
